Owning a listed building, a unique piece of history, can be the stuff of dreams. But the responsibility of looking after an aged, period property can be more of a nightmare. The regulations to abide by. The endless maintenance tasks. The issues to resolve. The list goes on!
One essential task is painting your listed building. It’s your chance to refresh your home, make it feel like yours and care for it too. By painting your historic home’s exterior, you protect it from the weather and keep it looking its best. A fresh coat of paint inside can bring out the beauty of your period property’s original features.
But when it’s a listed building, it’s important to choose a paint that’s compatible with older buildings and their traditional materials like lime plaster, lime render and masonry. Unlike materials used in modern builds, these traditional materials absorb and release moisture, so you need a paint that allows them to do their job. That’s exactly what breathable paint does. A good, breathable paint can help protect your walls and preserve the character that makes your home special.

What does it mean to have a listed building?
A listed building is a structure of special architectural or historic interest protected by UK law. In England, listed buildings fall into three grades: Grade I, Grade II* and Grade II.
- Grade I are historic buildings of exceptional or national importance (think Westminster Abbey and such like).
- Grade II* includes important buildings of more than special interest.
- Around 92% of listed buildings are Grade II — buildings of special interest.
In Scotland, it’s Category A, Category B and Category C.
As a custodian of a listed building, you have various rules to abide by to safeguard the fabric of your building. For example, you may face restrictions around the paint colours and finishes that you can use. It’s worth speaking to your local authority’s conservation officer. They can advise on suitable materials and whether your redecoration plans need listed building consent.
Which paints can I use for listed buildings?
You may be surprised to hear that you can’t use any old paint on a listed building. Often, standard acrylic paints aren’t allowed as they’re not compatible with the traditional materials used on heritage properties. Traditional lime render, lime plaster, masonry and traditional solid wall buildings need vapour permeability.
Conventional paints (like acrylic paint) trap moisture in your wall. Eventually, that moisture needs an escape route. That leads to blistering paint, blown plaster and render, rotting timbers, mould growth and condensation problems. And we’re sure you could do without them on your list of ever-growing list of issues to fix.
Breathable paint allows water vapour to pass through the painted surface. It helps the materials below the paint to manage moisture like they were intended to. That’s why breathable paint or limewash are the preferred choices for period homes and listed buildings.
There are some exceptions though, particularly on Grade I and Grade II* buildings. Some historic finishes need a more specialist approach to match the historic paint. Professional paint analysis (or paint-scrape analysis) can help identify previous layers and colours. This needs to be done by a specialist so you don’t remove valuable evidence of your building’s past.
How to choose breathable paint for listed buildings
How can you be sure that the paint you use will prevent damage to your walls? Breathability’s key, especially when choosing paint for listed buildings and older houses. A durable, breathable paint can significantly reduce the amount of maintenance your walls need (hooray for that!). That applies to both exterior and interior paint.
How can you tell if it’s breathable paint? Clay paint, limewash and silicate mineral paint tend to be the most breathable paints, but they’re not all made equal. Start by checking the Sd value (you’ll find it on the product’s data sheet). The lower the Sd value, the more easily water vapour can pass through. It's also worth checking the Moisture Vapour Transmission Rate (MVTR) which shows the amount of moisture that can move through a surface over 24 hours.
Interiors
Breathability’s key for interior paint choices. Start by identifying the surface beneath the current paint layer. Lime plaster needs a compatible finish that allows moisture to evaporate. You may find that your traditional lime plaster wall has been covered up with a restrictive layer like gypsum plaster. Applying breathable paint over a layer like that won’t restore the breathability of the whole wall.
Our Claypaint is a highly breathable, clay-based emulsion that works well with lime plaster. Its soft, ultra flat matt finish suits the textures and character of older houses’ interiors. It’s also virtually VOC free.
Mike and Meg Gush own Hallyards, a Category B1 listed country house near Peebles, Scotland. As custodians of the period property, the couple were keen to renovate it sympathetically.
Mike said, “The house is more than 500 years old in places and we wanted to do right by it, securing it for future generations.”
When they investigated, it became clear that traditional materials had been covered over or replaced over the years.
Mike explains that, “At some stage the replacement of lime plaster with gypsum plaster had damaged walls by preventing them from breathing. Some walls had to be completely rebuilt because they had rotted. All internal walls were replastered with lime to ensure they can now breathe.”
“For the internal decoration, we chose Earthborn Claypaint because it is highly breathable and works well with lime plaster. We also love the selection of colours available. Our palette is themed around the original colours that we uncovered, including the green on the library walls. We’ve chosen shades that complement the stone floors and slate worktops, aiming to create a bright and airy feel.”
Earthborn Wall Glaze was their choice for those busy areas that need to be cleaned easily and need a bit more durability. Mike points out,
“Hallyards is our family home, which means walls can be subject to the everyday wear and tear associated with young children. We applied the wall glaze as a precaution, making the walls easier to wipe clean.”
Read the full Hallyards renovation story
Exteriors
Exterior paint needs to be durable enough to cope with the British weather, in all its glory. It also needs to allow water vapour to pass through, supporting natural moisture regulation in your walls.
Before decorating, you need to check the condition of the existing render or masonry and address any damp problems. Cement repairs and vinyl paints can trap moisture in traditional brickwork, lime render and lime mortar. Look for breathable options to prevent this.
A breathable masonry paint’s more suitable for old buildings. Our Silicate Masonry Paint offers a highly breathable, weather-resistant finish for suitable mineral surfaces. It dries to a classic matt finish and can provide an alternative to traditional limewash or conventional masonry paints.
You also need to apply an appropriate primer. Our Silicate Primer’s designed for bare, absorbent mineral surfaces. It forms a permanent, highly breathable bond with the substrate. Our Bonding Primer’s the one to use on previously painted or less absorbent surfaces. It helps the paint to grip firmly to the surface below.

Protect your listed building with breathable paint
Listed buildings and heritage properties built with traditional materials need breathable paint to ensure moisture regulation. Your walls really need to let go of moisture or you’ll end up with those dreaded damp patches and even mould.
Breathable paints help your walls to behave as they’re meant to (absorbing and expelling water vapour). They help to preserve your building’s historic character.
For interior walls, our Claypaint’s a luxurious, breathable paint with an ultra flat matt finish. It’s available in our signature palette of 84 shades.
For external walls, our Silicate Masonry Paint is highly breathable, long-lasting and weather-resistant. There are 48 colours to choose from, so order a colour card or sample pot to find your shade.


