For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete.
£5.00
£34.50
£60.00
For masonry substrates with previous masonry paint application.
£52.00
£86.00
Earthborn Multi Purpose Primer provides a perfect base coat on interior wood, melamine and MDF surfaces.
£61.00
£22.99
Let’s face it — our internal doors go through a lot. From muddy paws and sticky little hands to the constant flow of people coming and going, it’s no wonder they can start to look a bit worse for wear over time.
The good news? A coat of paint can work wonders! Whether you’re refreshing tired old doors or adding a personal touch to brand new ones, painting is an easy way to breathe new life (and colour!) into your space. But to make sure your doors stay looking great for the long haul, it’s important to use the right paint and technique.
In this quick guide, we’ll walk you through how to paint doors – and provide some colourful inspiration along the way – so you can give your doors the makeover they deserve.
Prepare the area
Always properly prepare the area before you begin painting. You can protect the floor and the area surrounding the door from any paint splatters by laying down cloths, old bedding or dust sheets. It’s also a good idea to remove any obstacles or decorations near the door to ensure easy access and prevent them from being damaged.
Remove or loosen hardware such as doorknobs or handles, so you can get a professional looking finish by painting behind these.
Clean the door
Before painting, thoroughly clean the door to remove any dirt, dust or grease. A mild detergent mixed with water works best for this and should be used with a sponge or a cloth. Once you’ve rinsed the door, allow it to dry completely before you move on to the next step.
Repair any existing damage
Using fine grit sandpaper, lightly sand the surface of your door. This helps to remove any existing gloss or any rough patches, allowing the paint to adhere to the surface of the door better. Once finished, wipe away the sanding dust with a clean cloth.
If your door has any damage, now is the perfect time to repair it. Use a putty knife or scraper to fill in any imperfections such as dents, holes or scratches with wood filler or putty. Then, smooth the surface and let it dry. For more even results, sand the repaired areas so that they are even with the rest of the door.
Use painters tape
Use painter’s tape to mask off any areas around the door that you want to keep paint free. The more careful and precise you are when applying the tape, the better the result.
If you’d like to master the art of painting an edge without tape, here’s some handy tips.
Priming
Apply a coat of Multi Purpose Primer to the surface of the door. This allows the paint to stick to the surface better and ensures a smooth finish. You can use a paintbrush or roller to help you apply the primer evenly. Allow it to dry completely before you begin painting.
Paint the door
When painting your door, make sure to choose a high quality paint that is suitable for the material of your door. Our Eggshell No.17 provides a durable, washable and scuff resistant finish with a silk sheen, ideal for doors and interior woodwork.
Starting from the top and working downwards to minimise drips, apply the paint in thin, even coats using a paintbrush or roller. Apply the paint in the direction of the woodgrain for the best finish. With each coat of paint, allow it to dry before applying the next coat.
Leave the paint to dry
Once you’ve finished painting and allowed your paint to dry a little, carefully remove the printer’s tape.
It’s best to do this whilst the paint is still tacky as this helps to achieve clean lines without pulling off any dried paint in the process.
Leave the door open for a few hours, or ideally overnight, to let the paint cure before closing it. Check the paint tin for the recommended drying times.
