For bare porous unpainted masonry substrates such as lime plaster, stone, pebbledash & concrete.
£5.00
£33.00
£57.50
For masonry substrates with previous masonry paint application.
£51.00
£84.00
The two-part system is ideal for bare mineral surfaces but is not suitable for surfaces that have been previously painted in ‘plastic’ based conventional masonry paint.
First, apply a single full coat of Silicate Primer followed by two coats of Silicate Masonry Paint (first coat of which must be diluted with 20% Silicate Primer).
Please note, in order for the paint to successfully bond to the surface, the working temperature should be a minimum of 8°C and the moisture content of the wall should not exceed 20% or above.
Full application details can be found on our tins and data sheets.
